Call us at (951) 683-0930 or email us at sales@de-ice.com
Kymeta Go Case Antenna De-Ice System
Kymeta phased array de-icing system u8 Go Case utilizes one each 1,450 watt Electric Heating Unit controlled by a thermostat that operates one of the two 725 watt Elements to keep the antennas electronics warm in harsh environments. The second 725 watt Element is controlled by the DS-4C Moisture/Temperature Sensor for De-Icing conditions when there is snow or ice present.
Kymeta Fixed Mount Antenna De-Ice System
Kymeta phased array de-icing system u8 Fixed Mount De-Icing System utilizes one each 1,450 watt Electric Heating Unit controlled by a thermostat that operates one of the two 725 watt Elements to keep the antennas electronics warm in harsh environments. The second 725 watt Element is controlled by the DS-4C Moisture/Temperature Sensor for De-Icing conditions when there is snow or ice present.
DS-4C
The DS-4C Controller operates by detecting temperature through a base mounted thermistor and precipitation using a precipitation sensor. These signals are then supplied to the micro-controller, which will activate your de-icing system. The DS-4C Controller can be powered by either 110-120VAC or 200-240VAC 50/60Hz power.
Key Features
- Automatic activation lowers De-icing operational costs
- Reliable snow detection
- Dual 30A @ 240VAC individually controlled relays
- Replaceable precipitation sensor
- Adjustable temperature trigger point
- Adjustable moisture sensing sensitivity
- Adjustable delay off cycle
- Selectable low temperature cutoff
- Easy installation and full access to electronics
- Automatic selection for 100-120/200-220VAC operation
Optional DP-7SS
The optional DP-7SS remote Monitor and Control/Status Panel provide a low cost method of remotely monitoring and controlling the DS-4C De-icing Control Units. The DP-7SS, mounted in a single rack unit (1.75 in. X 19 in.) panel with black finish to assure good indicator visibility.
The DP-7SS, which can be located up to 1200 ft from the DS-4C, has a blower on and heater on indicator LED. Manual, Auto, or Standby mode can be selected from the DS-7SS Panel. Dry Contact I/O’s or Ethernet is provided for interfacing with customer’s M&C System.
Key Features
- Low cost monitoring and controlling
- Compatible - DS-4C and DS-6